1.Power Off: Press the power button to turn off the device.
2.Remove the Vaporizer: Carefully detach the vaporizer from the device.
3.Inspect the Vaporizer: Discard the remaining water, turn the vaporizer over and send a photo to support.
4.Power On: Press the power button on.
5.Grab your backup Vaporizer: Install your new vaporizer
1.Fill with 500ml through the blue cap
6.Resume Treatment: If the treatment was interrupted, please adjust the treatment time by pressing the "-" button on "select cycles" to shorten the time. Every time you press the "-" button, an entire cycle (9 minutes of vapor and 5 minutes of oxygen: 14 minutes total) is removed from the treatment time.
Resources:
If the problem persists:
- Please refrain from using the device and contact Vaporox Support for assistance. Support is available from 8AM-4PM MST M-F.
- Phone: 303-223-0033
- Text: 303-223-0033
- Email: support@vaporox.com
We are committed to providing you with reliable support to ensure your treatment proceeds smoothly.
